fcgamer | 4,965 Posted November 29, 2019 Share Posted November 29, 2019 I'm using physical carts running on a Micro Genius IQ-501 famiclone, hooked up to a crt tv. What about you guys? 3 Link to comment Share on other sites More sharing options...
Teh_Lurv | 254 Posted November 29, 2019 Share Posted November 29, 2019 About a year ago, I organized my TV setup and put several consoles into storage as the area behind my TV stand had become an unmanageable mess of cables and switches. I was able to streamline my setup into the following: My setup has two TVs: A 43" 2011 LG 1080p HDTV A 13" Prima CRT TV (for lag sensitive retro games) I have following systems outputting component: Super Nintendo Sega Genesis/SegaCD Sega Saturn to a 3-way component switch which then feeds to a two-ways powered component splitter which mirrors that output to both the CRT and HDTV. I have the following systems outputting HDMI: AVS XBox One S Nintendo Switch to a 5-way HDMI switch which then feeds the output to my HDTV. Finally, I have another HDMI port on my HDTV dedicated to my Gaming/HDTV PC. 2 Link to comment Share on other sites More sharing options...
docile tapeworm | 4,256 Posted November 29, 2019 Share Posted November 29, 2019 (edited) My main stuff sony pvm 1351q jvc 27” d501 trinitron 13” kv-13fm13 i also have an avs and switch hooked up to a Vizio. Edited November 29, 2019 by skinnygrinny 1 Link to comment Share on other sites More sharing options...
DorkOverlord | 688 Posted November 29, 2019 Share Posted November 29, 2019 I could use better lighting and a bit of cable management, but this is my game room setup. It's a 36" Sony Trinitron with a few of my systems running through an AV switch so I don't have to keep swapping cables. 1 Link to comment Share on other sites More sharing options...
Bearcat-Doug | 5,116 Posted November 29, 2019 Share Posted November 29, 2019 (edited) Just a 24" Sharp LCD TV. The most impressive thing is that it has enough inputs for four consoles (actually five if I still had an Atari 2600 and hooked it up to the RF input). Edited November 29, 2019 by Bearcat-Doug 1 Link to comment Share on other sites More sharing options...
docile tapeworm | 4,256 Posted November 29, 2019 Share Posted November 29, 2019 @Bearcat-Doug go get a crt you poser 2 Link to comment Share on other sites More sharing options...
Bearcat-Doug | 5,116 Posted November 29, 2019 Share Posted November 29, 2019 1 minute ago, skinnygrinny said: @Bearcat-Doug go get a crt you poser I still have my RCA CRT in the closet as a backup. I might break it out next year. 1 Link to comment Share on other sites More sharing options...
dougeff | 14 Posted November 29, 2019 Share Posted November 29, 2019 Here's my current setup. 1 Link to comment Share on other sites More sharing options...
Tulpa | 3,677 Posted November 29, 2019 Share Posted November 29, 2019 TV is a Samsung DLP rear projection. It seems to have very little lag. NES/Famicom are played on an AVS with original NES controllers. Other consoles, mainly Game Boy and TG-16, played on a Raspberry Pi Zero W with a knockoff PlayStation USB controller. I don't have it all hooked up right now, but it can be in under a minute. I also have a couple of plug n play devices. I like the ones that have unique controls that can't be replicated by standard controllers, such as the Atari paddle games or the Bass Angler reel controller. The card/casino one just came with the fishing one. 2 Link to comment Share on other sites More sharing options...
Teh_Lurv | 254 Posted November 29, 2019 Share Posted November 29, 2019 3 hours ago, skinnygrinny said: My main stuff sony pvm 1351q jvc 27” d503 trinitron 13” kv-13fm13 i also have an avs and switch hooked up to a Vizio. SkinnyGranny is just showing off how rich he is with his three NES consoles in the corner. 1 2 Link to comment Share on other sites More sharing options...
docile tapeworm | 4,256 Posted November 29, 2019 Share Posted November 29, 2019 5 minutes ago, Teh_Lurv said: SkinnyGranny is just showing off how rich he is with his three NES consoles in the corner. Lol paired with that gotti wood panel lol actually picked those up in pretty sweet yard sale/marketplace finds. Link to comment Share on other sites More sharing options...
zeppelin03 | 314 Posted November 29, 2019 Share Posted November 29, 2019 (edited) I've put my CRTs into storage and may end up parting with them this coming year. Everything is run off of my OLED. My Famicom, N64, Dreamcast, Gamecube, and Wii have been HDMI modded. Super NT handles the SNES. The remaining consoles have been RGB modded and fill a basket with their cables. This includes TurboGrafx, Snes, Virtualboy, Saturn, PS1, and PS2. All of that is run off an OSSC with scart or HDretrovision cables. Modern stuff is HDMI of course. Edited November 29, 2019 by zeppelin03 4 Link to comment Share on other sites More sharing options...
Tanooki | 5,087 Posted November 29, 2019 Share Posted November 29, 2019 I'm running a Samsung UN32EH4003F I inherited from my grandma which she never really used before she passed. I got lucky that the display lag on the thing is so incredibly low that it causes no problems playing older games so it works perfectly for me. All my stuff runs through that as all my systems I've had modded or got external fix(GC) to run HDMI other than the Core Grafx which strangely runs excellent without. My PSOne sits on my desk with the Sony made panel, and for MVS I have a 2 slot Neo Geo with a 25" Wells & Gardener CRT in there. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now